PTI-SERT ® USEFUL TOOLS
TAP GUIDES INSURE THAT THREADS ARE SQUARE TO SURFACE.
The lower portion of the tap guide should remain as square as possible to the engine surface.
Turn the tap slowly while making sure the guide remains flush.
TAP GUIDES
| METRIC SIZE | PART NO. |
| M5x0.8 | 35086 |
| M6x1.0 | 36105 |
| M7x1.0 | 37105 |
| M8x1.25 | 38125 |
| M9x1.25 | 39125 |
| M10x1.0 | 30105 |
| M10x1.25 | 30125 |
| M10x1.5 | 30155 |
| M11x1.25 | 31125 |
| M11x1.5 | 31155 |
| M12x1.25 | 32125 |
| M12x1.5 | 32155 |
| M12x1.75 | 32175 |
| M14x1.5 | 34155 |
| M14x2.0 | 34255 |
| M16x1.5 | 36155 |
| M16x2.0 | 36205 |
| M18x1.5 | 38155 |
| M20x1.5 | 30215 |
| M22x1.5 | 32255 |
| M24x1.5 | 32455 |
| INCH SIZE | PART NO. |
| 1/4-20 | 31420 |
| 1/4-28 | 31420 |
| 5/16-18 | 35168 |
| 5/16-24 | 35168 |
| 3/8-16 | 33816 |
| 3/8-24 | 33824 |
| 7/16-14 | 37164 |
| 7/16-20 | 37162 |
| 1/2-13 | 31213 |
| 1/2-20 | 31225 |
| 5/8-18 | 25885 |
| 3/4-10 | 33415 |
| 3/4-16 | 33416 |
For Use in Restricted Areas
Ideal for use in areas where a T handle won’t fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2″. A lso fits 1/8″ NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.
PTI-SERT taps 4mm to 12mm metric / 4-40 to 1/2 inch.
Sockets #1 thru #4 use 1/4 drive,
rest use 3/8 drive.
Three Larger Sizes in a Convenient Set
The three largest tap sockets, are now packaged in a three piece set. Ideal for use where a T handle won’t fit, especially in restricted areas. For larger, fractional M.C.T.I. standard taps. #9 socket is 5/8″ (16mm), #10 is for 11/16″ (18mm) and #11 is for 3/4″. Sockets contained in a vinyl holder.
PTI-SERT taps 13mm to 16mm metric / 5/8 to 3/4 inch.
use 1/2 drive socket.
Straight Tap Wrench, Length 15 Inches, Hand Taps
Capacity 5/32 to 3/4 Inch, Taps M4 to M19
wrench number 6 P/N C67203
PTI-SERT taps 1/4 – 9/16 Inch, M5 – M14 Metric
Straight Tap Wrench, Length 19 Inches, Hand Taps
Capacity 1/4 to 1-1/8 Inch, Taps M12 to M28
wrench number 7 P/N C67204
T- handle wrench, Length 3-5/8 Hand Taps
Capacity 7/32” to 1/2” Inch Taps M5 to M12
wrench number T12 P/N C67209
PTI-SERT taps M5 – M11
Straight Tap Wrench, Length 40 Inches, Hand Taps
Capacity 3/4 to 1-5/8 Inch, Taps M19 to M40
wrench number 8 P/N C67205
Removes broken bolts 5/8 to 7/8.
If removing a PTI-SERT insert, this tool will remove
inserts from 1/2 to 9/16 inch or 12mm to 14mm metric.
Made from hardened tempered alloy steel. Use when a screw or bolt has broken off while still in the fastening hole. 5 pc set 3/32 to 5/8
If removing a PTI-SERT insert, this set will remove inserts from 4-40 to 7/16 inch or 4mm to 11mm metric.
Removes broken bolts 7/8 to 1-1/8.
If removing a PTI-SERT insert, this tool will remove inserts from 5/8 to 3/4 inch or 16mm to 20mm metric.
Removes broken bolts 1-1/8 to 1-3/8.
If removing a PTI-SERT insert, this tool will remove our 3/4 pipe insert.